Switches between non-approximated (e.g., Curved) Analytical Models and approximated (made up of lines only) Analytical Models

Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.

Indicates if Analytical Model can be approximated or not.

Indicates if the element can be hidden in the view.

Identifies if the element can be locked.

Checks if given subelement can be removed from the element.

Indicates if Analytical Auto-detect can be disabled programmatically

Indicates whether the Element can have an Analytical Model.

Indicates if Analytical Model supports Rigid Links.

Identifies if the element can have a type assigned.

Indicates if Analytical Model can use Hard Points.

Changes the type of the element.

The method clones the adjustment of one end of the AM on another AM, with respect to the one of the ends. One of the Analytical Model ends

Deletes the existing entity created by %schema% in the element

Removes a subelement from the element.

Removes the subelements from the element.

Unjoin from Hub Element.

Enables or disables Analytical Model, if the Element allows a one-operation Analytical Model toggle.

Enable or disable Analytical Auto-detect.

Determines whether the specified Object is equal to the current Object.

Retrieves writeable Analytical Model for Element.

Retrieves the Element Id of the Analytical Model Element for this Element.

Retrieves a collection of AnalyticalModelSketchComponent objects, which are useful for those Analytical Models that have finer calibration below the Element level.

Retrieves the AnalyticalModelSupport array, which is useful to extract Analytical Support Information from Elements.

Returns value of Analyze As parameter for Analytical Model.

Retrieves amount by which approximation is made.

Retrieves other Element Ids that this Element is Auto-detecting against.

Returns the single curve of the Analytical Model, if it is only one curve.

Retrieves all curves for the Analytical Model of a given type.

Get all elements that, from a logical point of view, are the children of this Element.

Retrieves Element Id of the structural element corresponding to the Analytical Model.

Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise.

Returns the Schema guids of any Entities stored in this element.

Gets information pertaining to the external file referenced by the element.

Gets the ExternalResourceReference associated with a specified external resource type.

Gets the full map of the external resource references referenced by the element.

Returns the ids of the element(s) that generated the input geometry object.

Retrieve one geometric primitive contained in the element given a reference.

Serves as a hash function for a particular type.

Gets the local coordinate system (LCS) for an analytical model element.

Retrieves other Element Ids against which the Analytical Model has been adjusted.

Gets the area of the material with the given id.

Gets the element ids of all materials present in the element.

Gets the volume of the material with the given id.

Provides the link instance IDs when the element is monitoring.

Provides the local element IDs when the element is monitoring.

Gets the offset of the analytical model at end.

Gets the parameters associated to the element in order.

Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.

Retrieves the parameters from the element via the given name.

Gets the status of a given element in the input phase

Retrieves point of the Analytical Model.

Returns a reference to a given curve within the analytical model.

Returns rigid link curve corresponding to selector.

Returns the collection of element subelements.

Gets the Type of the current instance.

Returns the identifier of this element's type.

Obtains a set of types that are valid for this element.

Indicates if Analytical Model contains deleted Analytical Links.

Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.

Indicates if Analytical Model has Rigid Links with specified element.

Determines if the given Analyze As parameter is valid for this Element.

Indicates if Analytical Model is approximated or not.

Reports if Analytical Auto-detect for the given direction is enabled.

Indicates if Analytical Model is fully supported.

Reports whether the Analytical Model is enabled or disabled.

Determines whether this Element represents an external file.

Identifies if the element has been permanently hidden in the view.

Indicates if the Analytical Model has been manually adjusted by the user.

Checks if AM has been adjusted from auto-detect at any end.

Indicate whether an element is monitoring any elements in any linked models.

Indicate whether an element is monitoring other local elements.

Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.

Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.

Indicates if the Analytical Model can be expressed as a single curve.

Indicates if the Analytical Model can be expressed as a single point.

Tests if the supplied direction is valid for Analytical Auto-detect.

Indicates if the identified reference is acceptable for Manual Analytical Adjustment.

Indicates if the identified reference is acceptable as a source for Manual Analytical Adjustment.

Indicates if reference is acceptable as a "Target" for Manual Analytical Adjustment.

Indicates if Rigid Links option is valid for the Analytical Model.

Indicates if the input selector is valid for the Analytical Model.

Checks if given type is valid for this element.

Attempts to find a parameter on the element which has the given name.

Perform Manual Analytical Adjustment on analytical model, with respect to another Element

Determines whether this Element uses external resources associated with a specified external resource type.

Determines whether this Element uses external resources.

The function is trying to recreate analytical link elements that were deleted by the user.

Resets all manual adjustments performed by the user onto the Analytical Model.

Sets value of Analyze As parameter for this Element.

Adjusts the amount by which approximation is made.

Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten.

Sets the offset of the analytical model at end.

Sets Hard Points for the Analytical Model.

Indicates if the Element supports Manual Analytical Adjustment.

Returns a string that represents the current object.

Indicates if the Analytical Model is using Hard Points during approximation.

The id of the assembly instance to which the element belongs.

Retrieves a box that circumscribes all geometry of the element.

Retrieves a Category object that represents the category or sub category in which the element resides.

Id of a Phase at which the Element was created.

Id of a Phase at which the Element was demolished.

Returns the design option to which the element belongs.

Returns the Document in which the Element resides.

Retrieves the geometric representation of the element.

The id of the group to which an element belongs.

A unique identifier for an Element in an Autodesk Revit project.

Indicates whether an element is transient or permanent.

Specifies whether the .NET object represents a valid Revit entity.

The id of the level associated with the element.

This property is used to find the physical location of an element within a project.

A human readable name for the Element.

The id of the view that owns the element.

Retrieves a parameter from the element given a GUID for a shared parameter.

Retrieves a parameter from the element given a parameter id.

Retrieves a parameter from the element based on its definition.

Retrieves a set containing all of the parameters that are contained within the element.

Retrieves a map containing all of the parameters that are contained within the element.

Identifies if the element has been pinned to prevent changes.

Indicates if parameters indicate if Rigid Links should be formed.

A stable unique identifier for an element within the document.

Get the element version Guid.

Identifies if the element is owned by a view.

Get Id of the Workset which owns the element.