Causes the object to release immediately any resources it may be utilizing.

Determines whether the specified Object is equal to the current Object.

Serves as a hash function for a particular type.

Gets the Type of the current instance.

Add a new locked alignment into the Autodesk Revit document.

Creates a new area

Creates a new Area BoundaryConditions element on a host element.

Creates a new Area BoundaryConditions element on a reference.

Creates a new boundary line as an Area border.

Creates new areas

Creates a new area tag.

Add a new family instance of a cross fitting into the Autodesk Revit document, using four connectors.

Creates a new CurtainSystem element from a set of faces.

Creates a new CurtainSystem element from a set of face references.

Creates a new detail curve element.

Creates an array of new detail curve elements.

Creates a new linear dimension object using the default dimension style.

Creates a new linear dimension object using the specified dimension style.

Add a new family instance of an elbow fitting into the Autodesk Revit document, using two connectors.

Creates a new Extrusion Roof.

Inserts a new instance of a family onto a face of an existing element, using a line on that face for its position, and a type/symbol.

Add a line based detail family instance into the Autodesk Revit document, using an line and a view where the instance should be placed.

Inserts a new instance of a family onto a face referenced by the input Reference instance, using a line on that face for its position, and a type/symbol.

Inserts a new instance of a family into the document, using a location and a type/symbol.

Add a new family instance into the Autodesk Revit document, using an origin and a view where the instance should be placed.

Inserts a new instance of a family into the document, using a curve, type/symbol and reference level.

Inserts a new instance of a family onto a face of an existing element, using a location, reference direction, and a type/symbol.

Inserts a new instance of a family onto a face referenced by the input Reference instance, using a location, reference direction, and a type/symbol.

Inserts a new instance of a family into the document, using a location, type/symbol and a base level.

Inserts a new instance of a family into the document, using a location, type/symbol, and the host element.

Inserts a new instance of a family into the document, using a location, type/symbol, the host element and a base level.

Inserts a new instance of a family into the document, using a location, type/symbol, the host element and a reference direction.

Creates Family instances within the document.

Creates a fascia along a reference.

Creates a fascia along a reference array.

Adds a new flexible duct into the document, using a point array and duct type.

Adds a new flexible duct into the document, using two connector, and duct type.

Adds a new flexible duct into the document, using a connector, point array and duct type.

Adds a new flexible pipe into the document, using a point array and pipe type.

Adds a new flexible pipe into the document, using two connector, and flexible pipe type.

Adds a new flexible pipe into the document, using a connector, point array and pipe type.

Creates a floor within the project with the given horizontal profile using the default floor style.

Creates a floor within the project with the given horizontal profile and floor style on the specified level.

Creates a floor within the project with the given horizontal profile and floor style on the specified level with the specified normal vector.

Creates a new FootPrintRoof element.

Creates a foundation slab within the project with the given horizontal profile and floor style on the specified level.

Creates a new type of group.

Creates a gutter along a reference.

Creates a gutter along a reference array.

Creates a new Line BoundaryConditions element on a host element.

Creates a new Line BoundaryConditions element on a reference.

Creates a new MEP mechanical system element.

Creates a new model line element.

Creates an array of new model line elements.

Creates a new opening in a beam, brace and column.

Creates a new opening in a roof, floor and ceiling.

Creates a new shaft opening between a set of levels.

Creates a rectangular opening on a wall.

Creates a new MEP piping system element.

Creates a new Point BoundaryConditions Element.

Creates a new instance of ReferencePlane.

Creates a new instance of ReferencePlane.

Creates a new unplaced room and with an assigned phase.

Creates a new room on a level at a specified point.

Creates a new room within the confines of a plan circuit, or places an unplaced room within the confines of the plan circuit.

Creates a new boundary line as an Room border.

Creates new rooms in each plan circuit found in the given level in the last phase.

Creates new rooms in each plan circuit found in the given level in the given phase.

Creates new unplaced rooms in the given phase.

Creates a new RoomTag referencing a room in the host model or in a Revit link.

Creates a slab within the project with the given horizontal profile using the default floor style.

Creates a slab edge along a reference.

Creates a slab edge along a reference array.

Creates a new unplaced space on a given phase.

Creates a new space element on the given level at the given location.

Creates a new space element on the given level, at the given location, and assigned to the given phase.

Creates a new boundary line as an Space border.

Creates a set of new unplaced spaces on a given phase.

Creates new spaces on the available plan circuits of a the given level.

Creates a new SpaceTag.

Generate a new spot coordinate object within the project.

Generate a new spot elevation object within the project.

Add a new family instance of an takeoff fitting into the Autodesk Revit document, using one connector and one MEP curve.

Add a new family instance of a tee fitting into the Autodesk Revit document, using three connectors.

Add a new family instance of an transition fitting into the Autodesk Revit document, using two connectors.

Add a new family instance of an union fitting into the Autodesk Revit document, using two connectors.

Creates a new Zone element.

Place an instance of a Model Group into the Autodesk Revit document, using a location and a group type.

Returns a string that represents the current object.

Identifies if the object is read-only or modifiable.