The PartMakerMethodToDivideVolumes type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
 | AddIntersectingReference |
Adds intersecting reference with an offset.
|
| AreElementsValidIntersectingReferences(ICollection<(Of <<'(ElementId>)>>)) |
Identifies if provided members are valid.
|
 | AreElementsValidIntersectingReferences(Document, ICollection<(Of <<'(ElementId>)>>)) |
Identifies if provided members are valid.
|
| CanBeDivisionProfile(ElementId) |
Checks whether a family defines a profile which can be used by this method.
|
| CanBeDivisionProfile(ElementId, Document) |
Checks whether a family defines a profile which can be used by this method.
|
| Dispose | Releases all resources used by the PartMakerMethodToDivideVolumes |
| Equals | Determines whether the specified Object is equal to the current Object. (Inherited from Object.) |
| GetHashCode | Serves as a hash function for a particular type. (Inherited from Object.) |
| GetOffsetForIntersectingReference |
Gets offset for the intersecting reference.
|
| GetPlaneOfSketch |
Gets the plane of the sketch.
|
| GetSketchCurves |
Populates the array with copies of curves in the sketch.
|
| GetSplitRefsOffsets |
Returns offsets for plane-defining splitters.
|
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| IsElementValidIntersectingReference(ElementId) |
Identifies if the provided member is valid.
|
| IsElementValidIntersectingReference(Document, ElementId) |
Identifies if the provided member is valid.
|
| IsValidSketchPlane |
Identifies if provided sketch plane is valid.
|
| RemoveIntersectingReference |
Removed intersecting reference.
|
| SetOffsetForIntersectingReference |
Sets offset for the intersecting reference.
|
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
| UsesReference |
Identifies if the PartMaker uses the intersecting reference.
|
Properties
| Name | Description | |
|---|---|---|
 | DivisionGap |
The gap which is created between matching profiles of parts.
|
| DivisionPatternMirror |
Whether pattern defined by the division rule should be mirrored before application
Mirroring is similar to changing indices of u-const gridlines.
|
| DivisionRotationAngle |
Angle by which both u- and v- gridlines of the division are rotated with respect
to the natural u/v-const directions of the sketch plane.
|
| DivisionRuleId |
Id of the 'DivisionRule' which is used to augment the cutting sketch.
|
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
|
| ProfileFlipAcross |
True if the corresponding left/upper parts profile are mirrored with respect
to the division line. False if the profile of left/upper parts are defined
directly by the profile family.
|
| ProfileFlipAlong |
True if the corresponding left/upper parts profile are mirrored with respect
to the center line of the hosts to be divided. False if the profile of
left/upper parts are defined directly by the profile family.
|
| ProfileMatch |
Determines how two profiles match.
|
| ProfileOffset |
The offset which is applied to a family-defined profile in the
direction away from the division line and toward left/upper part
to obtain its profile.
|
| ProfileType |
The id of the profile family applied to boundaries between parts.
|
| UConstDivisionIndent |
Indentation for the application of division rule's pattern across u-const gridlines
(i.e., similar to changing indices of u-const gridlines).
|
| VConstDivisionIndent |
Indentation for the application of division rule's pattern across v-const gridlines
(i.e., similar to changing indices of v-const gridlines).
|
