The FabricationPart type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
 | AddPartCustomData |
Add custom data type to the fabrication part. The new data gets the default value defined by the fabrication configuration.
|
| AdjustEndLength |
Adjusts the length for the specified connector.
|
 | AlignPartByConnector |
Align the part by its connector to a point and rotation in free space.
|
| AlignPartByConnectors |
Moves fabrication part by one of its connectors and aligns it to another connector.
|
| AlignPartByConnectorToConnector |
Align a part by its connector to another connector. This will replace the FabricationPart::AlignPartByConnectors method.
|
| AlignPartByInsertionPoint |
Align the part by its insertion point to a point and rotation in free space.
|
| AlignPartByInsertionPointAndCutInToStraight |
Align the part by its insertion point to a point and rotation on a straight. This will automatically size and connect the part being cut into, if possible.
|
| ArePhasesModifiable |
Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element.
(Inherited from Element.) |
| CanAdjustEndLength |
Checks if the end of fabrication part can be adjusted.
|
| CanASlopeBeApplied |
This will test if a slope can be applied to the part and maintain connections with any connected parts.
|
| CanBeHidden | Indicates if the element can be hidden in the view. (Inherited from Element.) |
| CanBeLocked |
Identifies if the element can be locked.
(Inherited from Element.) |
| CanDeleteSubelement |
Checks if given subelement can be removed from the element.
(Inherited from Element.) |
| CanHaveAnalyticalModel |
Indicates whether the Element can have an Analytical Model.
(Inherited from Element.) |
| CanHaveTypeAssigned()()()() |
Identifies if the element can have a type assigned.
(Inherited from Element.) |
| CanSplitStraight |
Validates if the straight can be split into two at the passed in point.
|
| ChangeTypeId(ElementId) |
Changes the type of the element.
(Inherited from Element.) |
| ConnectAndCouple |
Makes a connection between the specified connectors and adds coupling if necessary.
|
| Create(Document, FabricationItemFile, ElementId) |
Creates a fabrication part element from a fabrication item file.
|
| Create(Document, FabricationServiceButton, Int32, ElementId) |
Creates a fabrication part element based on button.
|
| Create(Document, FabricationServiceButton, Double, Double, ElementId) |
Creates a fabrication part element based on button and size.
|
| CreateHanger(Document, FabricationServiceButton, Int32, ElementId) |
Creates a free placed hanger.
|
| CreateHanger(Document, FabricationServiceButton, ElementId, Connector, Double, Boolean) |
Creates a hanger on the fabrication part.
|
| CreateHanger(Document, FabricationServiceButton, Int32, ElementId, Connector, Double, Boolean) |
Creates a hanger on the fabrication part.
|
| DeleteEntity |
Deletes the existing entity created by %schema% in the element
(Inherited from Element.) |
| DeleteSubelement |
Removes a subelement from the element.
(Inherited from Element.) |
| DeleteSubelements |
Removes the subelements from the element.
(Inherited from Element.) |
| Dispose | (Inherited from Element.) |
| Equals | Determines whether the specified Object is equal to the current Object. (Inherited from Object.) |
| GetAnalyticalModel |
Retrieves writeable Analytical Model for Element.
(Inherited from Element.) |
| GetAnalyticalModelId |
Retrieves the Element Id of the Analytical Model Element for this Element.
(Inherited from Element.) |
| GetCalculatedDimensionValue |
Gets the calculated dimension value.
|
| GetDependentElements |
Get all elements that, from a logical point of view, are the children of this Element.
(Inherited from Element.) |
| GetDimensionCalculatedOptions |
Gets the calculated options of the fabrication dimension.
|
| GetDimensions |
Gets all fabrication dimensions.
|
| GetDimensionValue |
Gets the value of the fabrication dimension, returns value in Revit internal units.
|
| GetEntity |
Returns the existing entity corresponding to the Schema if it has been saved in the
Element, or an invalid entity otherwise.
(Inherited from Element.) |
| GetEntitySchemaGuids |
Returns the Schema guids of any Entities stored in this element.
(Inherited from Element.) |
| GetExternalFileReference |
Gets information pertaining to the external file referenced
by the element.
(Inherited from Element.) |
| GetExternalResourceReference |
Gets the ExternalResourceReference associated with a specified external resource type.
(Inherited from Element.) |
| GetExternalResourceReferences |
Gets the full map of the external resource references referenced
by the element.
(Inherited from Element.) |
| GetGeneratingElementIds |
Returns the ids of the element(s) that generated the input geometry object.
(Inherited from Element.) |
| GetGeometryObjectFromReference |
Retrieve one geometric primitive contained in the element given a reference.
(Inherited from Element.) |
| GetHashCode | Serves as a hash function for a particular type. (Inherited from Object.) |
| GetHostedInfo |
Gets the fabrication hosted element information.
|
| GetInsulationLiningGeometry |
Gets insulation and lining geometry for this fabrication part.
|
| GetMaterialArea |
Gets the area of the material with the given id.
(Inherited from Element.) |
| GetMaterialIds |
Gets the element ids of all materials present in the element.
(Inherited from Element.) |
| GetMaterialVolume |
Gets the volume of the material with the given id.
(Inherited from Element.) |
| GetMonitoredLinkElementIds |
Provides the link instance IDs when the element is monitoring.
(Inherited from Element.) |
| GetMonitoredLocalElementIds |
Provides the local element IDs when the element is monitoring.
(Inherited from Element.) |
| GetOrderedParameters |
Gets the parameters associated to the element in order.
(Inherited from Element.) |
| GetParameterFormatOptions |
Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists.
(Inherited from Element.) |
| GetParameters | Retrieves the parameters from the element via the given name. (Inherited from Element.) |
| GetPartAncillaryUsage |
Gets a list of all ancillary usage information for the part.
|
| GetPartCustomDataInteger |
Get custom data integer value for the specified custom data.
|
| GetPartCustomDataReal |
Get custom data real value for the specified custom data.
|
| GetPartCustomDataText |
Get custom data text for the specified custom data.
|
| GetPhaseStatus |
Gets the status of a given element in the input phase
(Inherited from Element.) |
| GetProductListEntryCount |
Gets the number of product entries for this part.
|
| GetProductListEntryName |
Gets the specified product list entry name.
|
| GetRodInfo |
Gets the fabrication rod information.
|
| GetSubelements |
Returns the collection of element subelements.
(Inherited from Element.) |
| GetTransform |
Gets the transformation matrix of the fabrication part element.
|
| GetType | Gets the Type of the current instance. (Inherited from Object.) |
| GetTypeId |
Returns the identifier of this element's type.
(Inherited from Element.) |
| GetValidTypes()()()() |
Obtains a set of types that are valid for this element.
(Inherited from Element.) |
| GetVersionHistory |
Gets a history of version change information about the current part.
|
| HasCustomData |
Check if fabrication part contains custom data already.
|
| HasNoConnections |
Checks to see if all the fabrication part's connectors are open.
|
| HasPhases |
Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId.
(Inherited from Element.) |
| IsAHanger |
Checks whether it is a hanger.
|
| IsAStraight |
Checks whether it is a straight part.
|
| IsATap |
Checks if it is any sort of tap.
|
| IsDimensionCalculated |
Checks if the fabrication dimension is calculated.
|
| IsExternalFileReference |
Determines whether this Element represents an external
file.
(Inherited from Element.) |
| IsHidden | Identifies if the element has been permanently hidden in the view. (Inherited from Element.) |
| IsMonitoringLinkElement |
Indicate whether an element is monitoring any elements in any linked models.
(Inherited from Element.) |
| IsMonitoringLocalElement |
Indicate whether an element is monitoring other local elements.
(Inherited from Element.) |
| IsPhaseCreatedValid |
Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element.
(Inherited from Element.) |
| IsPhaseDemolishedValid |
Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element.
(Inherited from Element.) |
| IsProductList |
Gets whether or not the fabrication part is a product list.
|
| IsProductListEntryCompatibleSize |
Checks to see if this part can be changed to the specified product entry without altering any connected dimensions.
|
| IsSameAs |
Compare this fabrication part with the part passed and checks the pattern dimensions and options. A list of fields that can be ignored in the comparison check can be specified.
|
| IsValidType(ElementId) |
Checks if given type is valid for this element.
(Inherited from Element.) |
| LookupParameter | Attempts to find a parameter on the element which has the given name. (Inherited from Element.) |
| OptimizeLengths |
Optimizes the length fabrication straight parts.
|
| PlaceAsTap |
Places the part by its connector to a specific position on the straight part at the specified distance from the host part connector.
|
| PlaceFittingAsCutIn |
Places the fitting on the straight part by cut in, use the fitting's focal point as the insertion position.
|
| RefersToExternalResourceReference |
Determines whether this Element uses external resources associated with
a specified external resource type.
(Inherited from Element.) |
| RefersToExternalResourceReferences |
Determines whether this Element uses external resources.
(Inherited from Element.) |
| RemovePartCustomData |
Remove custom data from the fabrication part.
|
| Reposition |
Repositions the fabrication straight part to another end of the run.
|
| RotateConnectedPartByConnector |
Rotates a connected fabrication part around the axis of the specified connector.
|
| RotateConnectedTap |
Rotates a connected fabrication tap by the specified angles about the primary and secondary axis.
|
| SaveAsFabricationJob |
Save fabrication parts to an MEP job that can be opened in the fabrication software.
|
| SetCalculatedDimensionValue |
Sets the calculated dimension value.
|
| SetDimensionValue |
Sets the fabrication dimension value. The value is in Revit internal units.
|
| SetEntity |
Stores the entity in the element. If an Entity described by the same Schema already
exists, it is overwritten.
(Inherited from Element.) |
| SetPartCustomDataInteger |
Set the custom data integer value for the specified custom data.
|
| SetPartCustomDataReal |
Set the custom data real value for the specified custom data.
|
| SetPartCustomDataText |
Set the custom data real value for the specified custom data.
|
| SetPositionByEnd |
Positions the connector of the fabrication part element by the passed point.
|
| SplitStraight(XYZ) |
Splits the straight into two at the passed in point.
|
| SplitStraight(Document, ElementId, XYZ) |
Splits the straight into two at the passed in point.
|
| StretchAndFit |
Stretch the fabrication part from the specified connector and fit to the target routing end.
|
| ToString | Returns a string that represents the current object. (Inherited from Object.) |
Properties
| Name | Description | |
|---|---|---|
 | Alias |
The alias of the fabrication part.
|
| AssemblyInstanceId |
The id of the assembly instance to which the element belongs.
(Inherited from Element.) |
| BottomOfPartElevation |
The associated elevation to the bottom of fabrication part off of the current level.
|
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element.) |
| Category | Retrieves a Category object that represents the category or sub category in which the
element resides. (Inherited from Element.) |
| CenterlineLength |
The centerline length of the fabrication part.
|
| ConnectorManager |
The connector manager of the fabrication part.
|
| CreatedPhaseId |
Id of a Phase at which the Element was created.
(Inherited from Element.) |
| CutType |
The cut type of the fabrication part.
|
| DemolishedPhaseId |
Id of a Phase at which the Element was demolished.
(Inherited from Element.) |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element.) |
| Document | Returns the Document in which the Element resides. (Inherited from Element.) |
| DomainType |
The domain type for the fabrication part.
|
| DoubleWallMaterial |
The double wall material identifier of the fabrication part.
|
| DoubleWallMaterialArea |
The double wall material area of the fabrication part. If the fabrication part is not double walled, returns zero.
|
| DoubleWallMaterialThickness |
The double wall material thickness of the fabrication part. If the fabrication part is not double walled, returns zero.
|
| FreeSize |
The inner size of the fabrication part.
|
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element.) |
| GeometryChecksum |
Gets the geometry checksum of the fabrication part symbol, and it does nothing with the fabrication part instance position.
|
| GroupId |
The id of the group to which an element belongs.
(Inherited from Element.) |
| HangerRodKit |
Specifies whether an ancillary kit is being used to override support rods, bolts and clips, if any. A value of 0 indicates no override is being used.
|
| HasDoubleWall |
True if the fabrication part is double walled.
|
| HasInsulation |
True if the fabrication part is insulated.
|
| HasLining |
True if the fabrication part is lined.
|
| Id |
A unique identifier for an Element in an Autodesk Revit project.
(Inherited from Element.) |
| InsulationArea |
The insulation area of the fabrication part. If the fabrication part is not insulated, returns zero.
|
| InsulationSpecification |
The fabrication part insulation specification identifier.
|
| InsulationThickness |
The insulation thickness of the fabrication part. If the fabrication part is not insulated, returns zero.
|
| InsulationType |
The insulation type of the fabrication part.
|
| IsBoughtOut |
True if the fabrication part is bought out.
|
| IsTransient |
Indicates whether an element is transient or permanent.
(Inherited from Element.) |
| IsValidObject |
Specifies whether the .NET object represents a valid Revit entity.
(Inherited from Element.) |
| ItemCustomId |
The item custom identifier for the fabrication part.
|
| ItemNumber |
The item number that is used for identification, re-ordering from shop.
|
| LevelId |
The id of the level associated with the element.
(Inherited from Element.) |
| LevelOffset |
The associated level offset that indicates the distance from the center of the fabrication part to the current level.
|
| LiningArea |
The lining area of the fabrication part. If the fabrication part is not lined, returns zero.
|
| LiningThickness |
The lining thickness of the fabrication part. If the fabrication part is not lined, returns zero.
|
| LiningType |
The lining type of the fabrication part.
|
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element.) |
| Material |
The fabrication material identifier.
|
| MaterialThickness |
The material thickness of the fabrication part.
|
| Name | A human readable name for the Element. (Inherited from Element.) |
| Notes |
The notes of the fabrication part.
|
| Origin |
The origin of the fabrication part element.
|
| OverallSize |
The overall size of the fabrication part.
|
| OwnerViewId |
The id of the view that owns the element.
(Inherited from Element.) |
| Parameter[([( Guid])]) | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element.) |
| Parameter[([( BuiltInParameter])]) | Retrieves a parameter from the element given a parameter id. (Inherited from Element.) |
| Parameter[([( Definition])]) | Retrieves a parameter from the element based on its definition. (Inherited from Element.) |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element.) |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element.) |
| PartGuid |
The fabrication part's globally unique identifier.
|
| PartStatus |
The status identifier for the fabrication part.
|
| Pinned |
Identifies if the element has been pinned to prevent changes.
(Inherited from Element.) |
| ProductCode |
The current database id of the part within the fabrication database.
|
| ProductDataRange |
The product data range of the fabrication part.
|
| ProductFinishDescription |
The product finish description of the fabrication part.
|
| ProductInstallType |
The product install type of the fabrication part.
|
| ProductListEntry |
The product entry index of the fabrication part. A value of -1 indicates the fabrication part is not a product list.
|
| ProductLongDescription |
The product long description of the fabrication part.
|
| ProductMaterialDescription |
The product material description of the fabrication part.
|
| ProductName |
The product name of the fabrication part.
|
| ProductOriginalEquipmentManufacture |
The product original equipment manufacture (OEM) of the fabrication part.
|
| ProductShortDescription |
The product short description of the fabrication part.
|
| ProductSizeDescription |
The product size description of the fabrication part.
|
| ProductSpecificationDescription |
The product specification description of the fabrication part.
|
| ServiceAbbreviation |
The associated service abbreviation for the fabrication service.
|
| ServiceId |
The fabrication part service identifier. The service can only be changed to compatible services.
|
| ServiceName |
The name of the service associated with the fabrication part.
|
| ServiceType |
The service type identifier of the fabrication part.
|
| SheetMetalArea |
The sheet metal area of the fabrication part.
|
| Size |
The size of the fabrication part.
|
| Slope |
The slope for the straight fabrication part.
|
| Specification |
The fabrication part specification identifier.
|
| SpoolName |
The spool name of the fabrication part.
|
| TopOfPartElevation |
The associated elevation to the top of fabrication part off of the current level.
|
| UniqueId |
A stable unique identifier for an element within the document.
(Inherited from Element.) |
| ValidationStatus |
The validation status of the fabrication part.
|
| Vendor |
The vendor of the fabrication part.
|
| VendorCode |
The vendor code of the fabrication part.
|
| VersionGuid |
Get the element version Guid.
(Inherited from Element.) |
| ViewSpecific |
Identifies if the element is owned by a view.
(Inherited from Element.) |
| Weight |
The weight of the fabrication part.
|
| WorksetId |
Get Id of the Workset which owns the element.
(Inherited from Element.) |
