RebarCreateFromCurves(Document, RebarStyle, RebarBarType, RebarHookType, RebarHookType, Element, XYZ, IListCurve, RebarHookOrientation, RebarHookOrientation, Double, Double, ElementId, ElementId, Boolean, Boolean) Method

public static Rebar CreateFromCurves(
	Document doc,
	RebarStyle style,
	RebarBarType barType,
	RebarHookType startHook,
	RebarHookType endHook,
	Element host,
	XYZ norm,
	IList<Curve> curves,
	RebarHookOrientation startHookOrient,
	RebarHookOrientation endHookOrient,
	double hookRotationAngleAtStart,
	double hookRotationAngleAtEnd,
	ElementId endTreatmentTypeIdAtStart,
	ElementId endTreatmentTypeIdAtEnd,
	bool useExistingShapeIfPossible,
	bool createNewShape
)

Public Shared Function CreateFromCurves ( 
	doc As Document,
	style As RebarStyle,
	barType As RebarBarType,
	startHook As RebarHookType,
	endHook As RebarHookType,
	host As Element,
	norm As XYZ,
	curves As IList(Of Curve),
	startHookOrient As RebarHookOrientation,
	endHookOrient As RebarHookOrientation,
	hookRotationAngleAtStart As Double,
	hookRotationAngleAtEnd As Double,
	endTreatmentTypeIdAtStart As ElementId,
	endTreatmentTypeIdAtEnd As ElementId,
	useExistingShapeIfPossible As Boolean,
	createNewShape As Boolean
) As Rebar

public:
static Rebar^ CreateFromCurves(
	Document^ doc, 
	RebarStyle style, 
	RebarBarType^ barType, 
	RebarHookType^ startHook, 
	RebarHookType^ endHook, 
	Element^ host, 
	XYZ^ norm, 
	IList<Curve^>^ curves, 
	RebarHookOrientation startHookOrient, 
	RebarHookOrientation endHookOrient, 
	double hookRotationAngleAtStart, 
	double hookRotationAngleAtEnd, 
	ElementId^ endTreatmentTypeIdAtStart, 
	ElementId^ endTreatmentTypeIdAtEnd, 
	bool useExistingShapeIfPossible, 
	bool createNewShape
)

static member CreateFromCurves : 
        doc : Document * 
        style : RebarStyle * 
        barType : RebarBarType * 
        startHook : RebarHookType * 
        endHook : RebarHookType * 
        host : Element * 
        norm : XYZ * 
        curves : IList<Curve> * 
        startHookOrient : RebarHookOrientation * 
        endHookOrient : RebarHookOrientation * 
        hookRotationAngleAtStart : float * 
        hookRotationAngleAtEnd : float * 
        endTreatmentTypeIdAtStart : ElementId * 
        endTreatmentTypeIdAtEnd : ElementId * 
        useExistingShapeIfPossible : bool * 
        createNewShape : bool -> Rebar 

Parameters

doc  Document

A document.

style  RebarStyle

The usage of the bar, "standard" or "stirrup/tie".

barType  RebarBarType

A RebarBarType element that defines bar diameter, bend radius and material of the rebar.

startHook  RebarHookType

A RebarHookType element that defines the hook for the start of the bar. If this parameter is , it means to create a rebar with no hook.

endHook  RebarHookType

A RebarHookType element that defines the hook for the end of the bar. If this parameter is , it means to create a rebar with no hook.

host  Element

The element to which the rebar belongs. The element must support rebar hosting; [!:Autodesk::Revit::DB::Structure::RebarHostData].

norm  XYZ

The normal to the plane that the rebar curves lie on.

curves  IListCurve

An array of curves that define the shape of the rebar curves. They must belong to the plane defined by the normal and origin. Bends and hooks should not be included in the array of curves.

startHookOrient  RebarHookOrientation

Defines the orientation of the hook plane at the start of the rebar with respect to the orientation of the first curve and the plane normal. Only two values are permitted: Value = Right: The hook is on your right as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up." Value = Left: The hook is on your left as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up."

endHookOrient  RebarHookOrientation

Defines the orientation of the hook plane at the end of the rebar with respect to the orientation of the last curve and the plane normal. Only two values are permitted: Value = Right: The hook is on your right as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up." Value = Left: The hook is on your left as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up."

hookRotationAngleAtStart  Double

The out of plane hook rotation angle at the start of the bar.

hookRotationAngleAtEnd  Double

The out of plane hook rotation angle at the end of the bar.

endTreatmentTypeIdAtStart  ElementId

The end treatment type id at the start of the bar.

endTreatmentTypeIdAtEnd  ElementId

The end treatment type id at the end of the bar.

useExistingShapeIfPossible  Boolean

Attempts to assign a RebarShape from those existing in the document. If no shape matches, this function returns if createNewShape is false or it will create a new shape if createNewShape is true. When both parameters are "true", the behavior is the same as sketching rebar in the UI. At least one of these parameters must be "true". If the RebarShapeDefinesHooks flag in ReinforcementSettings has been set to false, and a RebarShape cannot be found with both matching curves and hooks, then this method will perform a second search, ignoring hook information.

createNewShape  Boolean

Creates a shape in the document to match the curves, hooks, and style specified, and assigns it to the new rebar instance. Shape creation will not succeed unless one or more other shapes already exist in the document, and these shapes have enough shape parameters to define a shape for these curves.

Return Value

Reference