FabricationPartAlignPartByInsertionPointAndCutInToStraight Method

Align the part by its insertion point to a point and rotation on a straight. This will automatically size and connect the part being cut into, if possible.

Namespace: Autodesk.Revit.DB
Assembly: RevitAPI (in RevitAPI.dll) Version: 25.0.0.0 (25.0.0.0)
Syntax
Copy
public static bool AlignPartByInsertionPointAndCutInToStraight(
	Document document,
	ElementId straightId,
	ElementId partId,
	XYZ position,
	double rotation,
	double slope,
	bool flip
)

Parameters

document  Document
The document.
straightId  ElementId
The element identifier of the straight to be cut in to.
partId  ElementId
The element identifier of the part to align and cut in with.
position  XYZ
The position to move the parts insertion point to.
rotation  Double
The rotation in radians.
slope  Double
The slope value to flex to match if possible in fractional units (eg.1/50). Positive values are up, negative are down. Slopes can only be applied to fittings, whilst straights will inherit the slope from the piece it is connecting to.
flip  Boolean
Flip the part to allow for flow direction.

Return Value

Boolean
True if the alignment succeeds, false otherwise.
Exceptions
ExceptionCondition
ArgumentException The element is not a fabrication part. -or- Not all of the fabrication part's connectors are open. -or- The part is not a straight. -or- The fabrication parts do not have matching domain types. -or- The position is not on the straight.
ArgumentNullException A non-optional argument was null
InvalidOperationException Failed to align the part to the straight to cut in to.
See Also