RebarContainerItemSetFromCurvesAndShape Method

public void SetFromCurvesAndShape(
	RebarShape rebarShape,
	RebarBarType barType,
	RebarHookType startHook,
	RebarHookType endHook,
	XYZ norm,
	IList<Curve> curves,
	RebarHookOrientation startHookOrient,
	RebarHookOrientation endHookOrient
)

Public Sub SetFromCurvesAndShape ( 
	rebarShape As RebarShape,
	barType As RebarBarType,
	startHook As RebarHookType,
	endHook As RebarHookType,
	norm As XYZ,
	curves As IList(Of Curve),
	startHookOrient As RebarHookOrientation,
	endHookOrient As RebarHookOrientation
)

public:
void SetFromCurvesAndShape(
	RebarShape^ rebarShape, 
	RebarBarType^ barType, 
	RebarHookType^ startHook, 
	RebarHookType^ endHook, 
	XYZ^ norm, 
	IList<Curve^>^ curves, 
	RebarHookOrientation startHookOrient, 
	RebarHookOrientation endHookOrient
)

member SetFromCurvesAndShape : 
        rebarShape : RebarShape * 
        barType : RebarBarType * 
        startHook : RebarHookType * 
        endHook : RebarHookType * 
        norm : XYZ * 
        curves : IList<Curve> * 
        startHookOrient : RebarHookOrientation * 
        endHookOrient : RebarHookOrientation -> unit 

Parameters

rebarShape  RebarShape

A RebarShape element that defines the shape of the rebar. A RebarShape element matches curves and hooks. A RebarShape element provides RebarStyle of the rebar.

barType  RebarBarType

A RebarBarType element that defines bar diameter, bend radius and material of the rebar.

startHook  RebarHookType

A RebarHookType element that defines the hook for the start of the bar. If this parameter is , it means to create a rebar with no hook.

endHook  RebarHookType

A RebarHookType element that defines the hook for the end of the bar. If this parameter is , it means to create a rebar with no hook.

norm  XYZ

The normal to the plane that the rebar curves lie on.

curves  IListCurve

An array of curves that define the shape of the rebar curves. They must belong to the plane defined by the normal and origin. Bends and hooks should not be included in the array of curves.

startHookOrient  RebarHookOrientation

Defines the orientation of the hook plane at the start of the rebar with respect to the orientation of the first curve and the plane normal. Only two values are permitted: Value = Right: The hook is on your right as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up." Value = Left: The hook is on your left as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up."

endHookOrient  RebarHookOrientation

Defines the orientation of the hook plane at the end of the rebar with respect to the orientation of the last curve and the plane normal. Only two values are permitted: Value = Right: The hook is on your right as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up." Value = Left: The hook is on your left as you stand at the end of the bar, with the bar behind you, taking the bar's normal as "up."

Reference