Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures..::..RebarCouplerFailures type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | CantKeepConstraintsToBars |
The constraints between the coupler and the two connected bars are no longer satisfied. Post error to delete the coupler.
|
| CouplerRequiredRemoveFromGroup |
The coupler is invalid in group.
|
| CouplerTypeInvalid |
This coupler type does not fit on the selected bar(s). Post error to delete the coupler.
|
| DisconnectElements |
Disconnect the coupler from the connected bar.
|
| DistanceBetweenBarsError |
This is used to post error. The distance between the connected ends of the bars exceeds 10 bar diameters.
|
| DistanceBetweenBarsWarning |
This is used to post warning. The distance between the connected ends of the bars exceeds 10 bar diameters.
|
| EngagementBiggerThanLengthError |
This is used to post error. The sum of bar engagements is greater than the total coupler length.
|
| EngagementBiggerThanLengthWarning |
This is used to post warning. The sum of bar engagements is greater than the total coupler length.
|
| LengthParameterError |
This is used to post error. The "Total Length" parameter must be set to a strictly positive value.
|
| LengthParameterWarning |
This is used to post warning. The "Total Length" parameter must be set to a strictly positive value.
|
| MainEngagementParameterError |
This is used to post error. "Bar Engagement 1" has an incorrect value.
|
| MainEngagementParameterWarning |
This is used to post warning. "Bar Engagement 1" has an incorrect value.
|
| NoBarSizeError |
This is used to post error. At least Bar Size 1 or Bar Size 2 should have another value than "None".
|
| NoBarSizeWarning |
This is used to post warning. At least Bar Size 1 or Bar Size 2 should have a value other than "None".
|
| NoTypeParamsDefinedWarning |
The parameters of the default type have no values.
|
| SecondaryEngagementParameterError |
This is used to post error. "Bar Engagement 2" has an incorrect value.
|
| SecondaryEngagementParameterWarning |
This is used to post warning. "Bar Engagement 2" has an incorrect value.
|
| WidthParameterError |
This is used to post error.The "External Diameter" parameter must be set to a strictly positive value.
|
| WidthParameterWarning |
This is used to post warning. The "External Diameter" parameter must be set to a strictly positive value.
|
