Rise |
This enumeration corresponds to the rise/drop symbol used
in mechanical systems
Namespace: Autodesk.Revit.DB.Mechanical
Assembly: RevitAPI (in RevitAPI.dll) Version: 26.0.4.0 (26.0.4.0)
SyntaxMembers| Member name | Value | Description |
|---|---|---|
| Backslash | 6 | Duct return rise/drop with \ pattern |
| BackslashFilled | 7 | Duct return rise/drop with \ pattern and lower left \ is filled |
| BendFullCircle | 14 | Pipe 1 Line bend full circle |
| BendThreeQuarterCircle | 13 | Pipe 1 Line bend 3/4 circle |
| Cross | 2 | Duct supply rise/drop with X pattern |
| CrossFilled | 3 | Duct supply rise/drop with X pattern and top and bottom of X is filled |
| CrossNoOutline | 17 | Cable Tray 1 Line a cross without outline |
| CustomSymbol | -1 | A userdefined symbol for rise/drop graphics is used |
| NoSymbol | 0 | No rise/drop graphics will be used |
| Outline | 1 | Outline only no internal geometry |
| OutlineFilled | 10 | Outline only no internal geometry and filled to be solid |
| ReverseWye | 9 | Duct exhaust rise/drop with /\ pattern |
| ReverseWyeFilled | 19 | Duct exhaust rise/drop with /\ pattern and lower right \ is filled |
| Slash | 4 | Duct return rise/drop with / pattern |
| SlashFilled | 5 | Duct return rise/drop with / pattern and lower right / is filled |
| TeeFullCircle | 16 | Pipe 1 Line junction full circle |
| TeeHalfCircle | 15 | Pipe 1 Line junction 1/2 circle on each side |
| Wye | 8 | Duct exhaust rise/drop with \/ pattern |
| WyeFilled | 18 | Duct exhaust rise/drop with \/ pattern and lower left / is filled |
| YinYang | 11 | Pipe contour rise/drop and 2 half circles (yin-yang) |
| YinYangFilled | 12 | Pipe contour rise/drop and 2 half circles (yin-yang) left side is filled |
See Also