Provides a container of all Revit built-in FailureDefinitionId instances.
The BuiltInFailures..::..FabricFailures type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
  | BendDiameterNegative |
Fabric Bend Diameter is negative.
|
| BendPolylineInvalid |
The bend profile contains too short of a segment to apply the wire bend diameter. Cannot create a bent fabric sheet for this type.
|
| BentHiddenWires |
The wires of this custom fabric sheet type are longer than the bending sketch. The linear quantities shown in schedules and tags are not accurate.
|
| CannotPlaceFabricArea |
Can't find a host for Fabric Area.
|
| CannotPlaceFabricAreaWarn |
Can't find a host for Fabric Area.
|
| CannotPlaceFabricSheet |
Can't find a host for Fabric Sheet.
|
| CannotPlaceFabricSheetWarn |
Can't find a host for Fabric Sheet.
|
| CoverOffsetTooLong |
Cover offset is greater than host thickness.
|
| CoverOffsetTooLongTemp |
Cover offset is greater than host thickness - support for transient Single Fabric Sheet in editor.
|
| FabricAreaWrongHost |
Fabric Area can be placed only in Structural Floors and straight Structural Walls.
|
| FabricAreaWrongLapSplice |
Fabric Area Sheet lap splice is incorrect. Can't create Fabric Area.
|
| FabricAreaWrongSheetAlignment |
Fabric Area Sheet Alignment is incorrect. Can't create Fabric Area.
|
| FabricSheetWrongHost |
Fabric Sheet can be placed only in Structural Floors and straight Structural Walls.
|
| MajorLapSpliceFailure |
The lap splice in the major direction is greater than the half of the overall length.
|
| MajorOverhangFailure |
At least one of the overhangs in the major direction is lower than radius of the wire in the minor direction.
|
| MajorSpacingFailure |
The spacing in the major direction is lower than diameter of the wire in the minor direction.
|
| MinorLapSpliceFailure |
The lap splice in the minor direction is greater than the half of the overall width.
|
| MinorOverhangFailure |
At least one of the overhangs in the minor direction is lower than radius of the wire in the major direction.
|
| MinorSpacingFailure |
The spacing in the minor direction is lower than diameter of the wire in the major direction.
|
| NoSurfPatternOnWire |
Wire elements do not support surface patterns. The surface pattern associated with this material will not be displayed on the indicated Fabric Sheet Type.
|
| NoWireMaterialDensity |
Material does not have a density defined. The weight of the Fabric Sheet cannot be computed.
|
| WireDiameterTooLarge |
Fabric Wire Diameter is too large.
|
| WrongFabricSheetEndOverhang |
Wrong Start Overhang of the Fabric Sheet Type.
|
| WrongFabricSheetLayoutPattern |
The Layout Pattern cannot accommodate the current data. Try decreasing the Number of Wires/Spacing.
|
| WrongFabricSheetNumberOfWires |
Wrong Number of Wires of the Fabric Sheet Type.
|
| WrongFabricSheetOverallLength |
Wrong Overall Length/Width of the Fabric Sheet Type.
|
| WrongFabricSheetSpacing |
Wrong Spacing of the Fabric Sheet Type.
|
| WrongFabricSheetStartOverhang |
Wrong Start Overhang of the Fabric Sheet Type.
|
